| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
10/22/2019 - 10/23/2019 |
Start Time: 08:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
10/24/2019 - 10/25/2019 |
Start Time: 08:00 AM |
|
| CCV207: FactoryTalk View SE Programming, 4.5 days |
|
Upon completion of this course, you should be able to organize and develop FactoryTalk"'View Site Edition (SE) applications
This course provides opportunities for you to work with local... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NC - Gresham |
10/28/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCP250: Logix 5000 Programmer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
10/28/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCA182: PowerFlex 750-Series Configuration and Startup, 2 days |
|
Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up the drive and configure drive parameters to... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Everett |
10/29/2019 - 10/30/2019 |
Start Time: 08:00 AM |
|
| CCA183: PowerFlex 750-Series Maintenance and Troubleshooting, 2 days |
|
This two-day course can be taken as a stand-alone course, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to further broaden skills... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Everett |
10/31/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity to develop and... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
11/04/2019 - 11/08/2019 |
Start Time: 12:00 AM |
|
| CCP300: Logix 5000 Maintainer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NCE - Tacoma |
11/11/2019 - 11/15/2019 |
Start Time: 08:00 AM |
|
| CCP143: Studio 5000 Logix Designer Level 3: Project Development, 4 days |
|
Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification.
This... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
11/12/2019 - 11/15/2019 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity to develop and... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NC - Gresham |
11/18/2019 - 11/22/2019 |
Start Time: 12:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
11/19/2019 - 11/20/2019 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $0.0
|
| Rockwell Automation - Bellevue |
11/21/2019 - 11/22/2019 |
Start Time: 08:00 AM |
|
| CCV204-A: FactoryTalk View ME & PanelView Plus Programming, 4 days |
|
After completing this course, given a computer with FactoryTalk"View Machine Edition (ME) software and a PanelView'M Plus 7 terminal, you should be able to produce an operational application... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| NC - Gresham |
12/03/2019 - 12/06/2019 |
Start Time: 08:00 AM |
|
| CCP143: Studio 5000 Logix Designer Level 3: Project Development, 4 days |
|
Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification.
This... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
12/03/2019 - 12/06/2019 |
Start Time: 08:00 AM |
|
| CCP251: Logix 5000 Advanced Programmer Certificate, 4 days |
|
This course is for individuals who can quickly learn and apply Logix 5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment. You will learn... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
12/10/2019 - 12/13/2019 |
Start Time: 08:00 AM |
|
| CCP300: Logix 5000 Maintainer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
12/16/2019 - 12/20/2019 |
Start Time: 08:00 AM |
|
| CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance & Troubleshooting, 4 days |
|
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| NCE - Bellingham |
12/17/2019 - 12/20/2019 |
Start Time: 08:00 AM |
|
| CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance & Troubleshooting, 4 days |
|
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
01/07/2020 - 01/10/2020 |
Start Time: 08:00 AM |
|
| CCP250: Logix 5000 Programmer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
01/13/2020 - 01/17/2020 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
01/20/2020 - 01/24/2020 |
Start Time: 12:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
01/28/2020 - 01/29/2020 |
Start Time: 08:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Eugene |
01/28/2020 - 01/29/2020 |
Start Time: 08:00 AM |
|
| CCP183: Ethernet/IP Configuration and Troubleshooting, 3 days |
|
This course should prepare you to effectively:
• Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements
• Assign IP addresses to... READ MORE
|
Duration: 2 days
Cost: $1920.0
|
| NCE - Tacoma |
01/28/2020 - 01/30/2020 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Eugene |
01/30/2020 - 01/31/2020 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
01/30/2020 - 01/31/2020 |
Start Time: 08:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
10/22/2019 - 10/23/2019 |
Start Time: 08:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
10/24/2019 - 10/25/2019 |
Start Time: 08:00 AM |
|
| CCV207: FactoryTalk View SE Programming, 4.5 days |
|
Upon completion of this course, you should be able to organize and develop FactoryTalk"'View Site Edition (SE) applications
This course provides opportunities for you to work with local... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NC - Gresham |
10/28/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCP250: Logix 5000 Programmer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
10/28/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCA182: PowerFlex 750-Series Configuration and Startup, 2 days |
|
Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up the drive and configure drive parameters to... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Everett |
10/29/2019 - 10/30/2019 |
Start Time: 08:00 AM |
|
| CCA183: PowerFlex 750-Series Maintenance and Troubleshooting, 2 days |
|
This two-day course can be taken as a stand-alone course, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to further broaden skills... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Everett |
10/31/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity to develop and... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
11/04/2019 - 11/08/2019 |
Start Time: 12:00 AM |
|
| CCP300: Logix 5000 Maintainer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NCE - Tacoma |
11/11/2019 - 11/15/2019 |
Start Time: 08:00 AM |
|
| CCP143: Studio 5000 Logix Designer Level 3: Project Development, 4 days |
|
Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification.
This... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
11/12/2019 - 11/15/2019 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity to develop and... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NC - Gresham |
11/18/2019 - 11/22/2019 |
Start Time: 12:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
11/19/2019 - 11/20/2019 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $0.0
|
| Rockwell Automation - Bellevue |
11/21/2019 - 11/22/2019 |
Start Time: 08:00 AM |
|
| CCV204-A: FactoryTalk View ME & PanelView Plus Programming, 4 days |
|
After completing this course, given a computer with FactoryTalk"View Machine Edition (ME) software and a PanelView'M Plus 7 terminal, you should be able to produce an operational application... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| NC - Gresham |
12/03/2019 - 12/06/2019 |
Start Time: 08:00 AM |
|
| CCP143: Studio 5000 Logix Designer Level 3: Project Development, 4 days |
|
Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification.
This... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
12/03/2019 - 12/06/2019 |
Start Time: 08:00 AM |
|
| CCP251: Logix 5000 Advanced Programmer Certificate, 4 days |
|
This course is for individuals who can quickly learn and apply Logix 5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment. You will learn... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
12/10/2019 - 12/13/2019 |
Start Time: 08:00 AM |
|
| CCP300: Logix 5000 Maintainer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
12/16/2019 - 12/20/2019 |
Start Time: 08:00 AM |
|
| CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance & Troubleshooting, 4 days |
|
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| NCE - Bellingham |
12/17/2019 - 12/20/2019 |
Start Time: 08:00 AM |
|
| CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance & Troubleshooting, 4 days |
|
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
01/07/2020 - 01/10/2020 |
Start Time: 08:00 AM |
|
| CCP250: Logix 5000 Programmer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
01/13/2020 - 01/17/2020 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
01/20/2020 - 01/24/2020 |
Start Time: 12:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
01/28/2020 - 01/29/2020 |
Start Time: 08:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Eugene |
01/28/2020 - 01/29/2020 |
Start Time: 08:00 AM |
|
| CCP183: Ethernet/IP Configuration and Troubleshooting, 3 days |
|
This course should prepare you to effectively:
• Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements
• Assign IP addresses to... READ MORE
|
Duration: 2 days
Cost: $1920.0
|
| NCE - Tacoma |
01/28/2020 - 01/30/2020 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Eugene |
01/30/2020 - 01/31/2020 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
01/30/2020 - 01/31/2020 |
Start Time: 08:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| Tool Truck Counter Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Klamath Falls |
10/22/2019 - 10/22/2019 |
Start Time: 07:00 AM |
|
| Rolling Through: Tool Truck Counter Morning |
|
Join Steve Stenger from our Tool Division to check out the Tool Truck and see demonstrations of new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Grants Pass |
10/23/2019 - 10/23/2019 |
Start Time: 07:00 AM |
|
| Medford Tool Truck Morning |
|
Steve Stenger from our Tool Division will be here with the Tool Truck to demonstrate new products! Breakfast treats will be served!
|
Duration: 1 Days
Cost: $0.0
|
| NC - Medford |
10/24/2019 - 10/24/2019 |
Start Time: 07:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
10/22/2019 - 10/23/2019 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
10/24/2019 - 10/25/2019 |
Start Time: 08:00 AM |
|
| CCV207: FactoryTalk View SE Programming, 4.5 days |
|
Upon completion of this course, you should be able to organize and develop FactoryTalk"'View Site Edition (SE) applications
This course provides opportunities for you to work with local... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NC - Gresham |
10/28/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCP250: Logix 5000 Programmer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
10/28/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCA182: PowerFlex 750-Series Configuration and Startup, 2 days |
|
Upon completion of this course, given a wired PowerFlex 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to start up the drive and configure drive parameters to... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Everett |
10/29/2019 - 10/30/2019 |
Start Time: 08:00 AM |
|
| CCA183: PowerFlex 750-Series Maintenance and Troubleshooting, 2 days |
|
This two-day course can be taken as a stand-alone course, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to further broaden skills... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Everett |
10/31/2019 - 11/01/2019 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity to develop and... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
11/04/2019 - 11/08/2019 |
Start Time: 12:00 AM |
|
| CCP300: Logix 5000 Maintainer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NCE - Tacoma |
11/11/2019 - 11/15/2019 |
Start Time: 08:00 AM |
|
| CCP143: Studio 5000 Logix Designer Level 3: Project Development, 4 days |
|
Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification.
This... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
11/12/2019 - 11/15/2019 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity to develop and... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| NC - Gresham |
11/18/2019 - 11/22/2019 |
Start Time: 12:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
11/19/2019 - 11/20/2019 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $0.0
|
| Rockwell Automation - Bellevue |
11/21/2019 - 11/22/2019 |
Start Time: 08:00 AM |
|
| CCV204-A: FactoryTalk View ME & PanelView Plus Programming, 4 days |
|
After completing this course, given a computer with FactoryTalk"View Machine Edition (ME) software and a PanelView'M Plus 7 terminal, you should be able to produce an operational application... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| NC - Gresham |
12/03/2019 - 12/06/2019 |
Start Time: 08:00 AM |
|
| CCP143: Studio 5000 Logix Designer Level 3: Project Development, 4 days |
|
Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification.
This... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
12/03/2019 - 12/06/2019 |
Start Time: 08:00 AM |
|
| CCP251: Logix 5000 Advanced Programmer Certificate, 4 days |
|
This course is for individuals who can quickly learn and apply Logix 5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment. You will learn... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
12/10/2019 - 12/13/2019 |
Start Time: 08:00 AM |
|
| CCP300: Logix 5000 Maintainer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
12/16/2019 - 12/20/2019 |
Start Time: 08:00 AM |
|
| CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance & Troubleshooting, 4 days |
|
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| NCE - Bellingham |
12/17/2019 - 12/20/2019 |
Start Time: 08:00 AM |
|
| CCP153: Studio 5000 Logix Designer Level 2: ControlLogix Maintenance & Troubleshooting, 4 days |
|
Upon completion of this course, you will be able to troubleshoot a previously operational ControlLogix system and restore normal operation. This course adds to your skill set by introducing new... READ MORE
|
Duration: 3 days
Cost: $2360.0
|
| Rockwell Automation - Bellevue |
01/07/2020 - 01/10/2020 |
Start Time: 08:00 AM |
|
| CCP250: Logix 5000 Programmer Certificate, 5 days |
|
This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
01/13/2020 - 01/17/2020 |
Start Time: 08:00 AM |
|
| CCP299: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals and Troubleshooting, 4.5 days |
|
Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation.
You will have the opportunity... READ MORE
|
Duration: 4 days
Cost: $2780.0
|
| Rockwell Automation - Bellevue |
01/20/2020 - 01/24/2020 |
Start Time: 12:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
01/28/2020 - 01/29/2020 |
Start Time: 08:00 AM |
|
| CCP146: Studio 5000 Logix Designer Level 1: ControlLogix System Fundamentals, 2 days |
|
This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.
You will... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Eugene |
01/28/2020 - 01/29/2020 |
Start Time: 08:00 AM |
|
| CCP183: Ethernet/IP Configuration and Troubleshooting, 3 days |
|
This course should prepare you to effectively:
• Configure a Stratix® switch (5700, 8000, and/or 8300) to meet a variety of network requirements
• Assign IP addresses to... READ MORE
|
Duration: 2 days
Cost: $1920.0
|
| NCE - Tacoma |
01/28/2020 - 01/30/2020 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| NCE - Eugene |
01/30/2020 - 01/31/2020 |
Start Time: 08:00 AM |
|
| CCP151: Studio 5000 Logix Designer Level 2: Basic Ladder Logic Programming, 2 days |
|
This course is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™... READ MORE
|
Duration: 1 days
Cost: $1600.0
|
| Rockwell Automation - Bellevue |
01/30/2020 - 01/31/2020 |
Start Time: 08:00 AM |
|
0
