The HW (hot water) Series was intended for use as a 2 circuit thermostat controlling a circuit pump and fan on a hydronic coil heating system, though it could be used when needing a 2 circuit control with 1 minute delay on the second circuit. This control solves the historic problem of using a standard 22 Amp bi-metal heating thermostat on a hydronic system which require high Amp loads to be accurate. Without a load they will not shut off properly, continuing to circulate hot water when not needed. This control positively controls both circuits creating energy savings and superior comfort control, while providing excellent hydronic control. Accuracy: ± 1.2°F @ 10amps, ± .9°F @ 4.2amps. 120volts / 12.5amps. Range: 40°F to 95°F (4°C to 35°C). Save up to 15% on your heating costs. Electronic temperature sensing is the most accurate technology. 3 minute cycle rate reduces temperature swings and increases comfort at all control settings. 2 circuits, 1 minute delay on 2nd circuit. LCD backlight display with temperature. 1-year limited warranty.
