Klein Tools 1684-5F 0.16 to 0.55 Inch 8000 lb Forged Steel Wire Pulling Grip

Features

• Designed for cable sizes from 0.16-Inch (4.06 mm) to 0.55-Inch (13.97 mm)
• Double "V" grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
• For larger conductors, see our grips with round inside-jaw contour
• Similar to Cat. No. 1684-5 except with a file inserted in jaw for extra gripping power. Replacement file No. 578 and screws No. 573 are also available
• Locking handle keeps jaw open while grip is placed on cable with a hot stick

Warnings

• Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
• When used on/near energized lines, ground, insulate, or isolate grip before pulling.
• Do not exceed rated capacity.
• Always match proper size and type of grip to application.
• Grips are to be used for temporary installation, not for permanent anchorage.

Specifications

• Application: Wire Pulling
• Cable Type: Aircraft, EHS, Messenger, Guy Strand
• Jaw Type: Single V with File Insert
• Jaw Length: 5" (12.7 cm)
• Type: Chicago Grip
• Sub Brand: Chicago Grip
• Maximum Safe Load: 8000 lb (3629 kg)
• Cable Diameter: 0.16" to 0.55" (4.06 to 13.97 mm)
• Weight: 6.4 lb (2.9 kg)
• Locking Handle: Y
• Hot Latch: N
• Spring: Y
• Size_Name: 0.16 to 0.55-Inch Cable Diameter
• Style_Name: Safe Load 8,000 lbs.
• Swing Latch: N
• Replacement Parts: 570, 573, 578,
• Accessories: 25450,
• Item Height (in): 1.7600
• Item Width (in): 6.5000
• Item Depth (in): 9.2500
• Item Weight (lbs): 6.3750